S8VS-03005 Omron voeding.

Omron
excl Verzendkosten kg
    Levertijd:informeer naar de levertijd
  • Beschrijving
  • Meer

S8VS-03005 VDC / 2,5 A, 30 W, ultracompacte behuizing, DIN-railmontage, 85-264 VAC primair, schroefaansluiting.

Omron S8VS-03005 voeding met een secundaire spanning 5 VDC en 2,5 A, 30 W in een ultracompacte behuizing en met DIN-railmontage. De primaire spanning is 85-264 VAC. Dezee voeding is voorzien van schroefaansluiting.Het betrfet hier onderdelen die nog nieuw zijn maar met bijvoorbeeld eeen beschadigde verpakking.

Omron S8VS-03005 voeding met een secundaire spanning 5 VDC en 2,5 A, 30 W in een ultracompacte behuizing en met DIN-railmontage. De primaire spanning is 85-264 VAC. Dezee voeding is voorzien van schroefaansluiting. Het betreft hier onderdelen die nog nieuw zijn maar met bijvoorbeeld een beschadigde verpakking.

Power rating 30 W
Efficiency 74 % TYP. (At 100 VAC input)
74 % TYP. (At 200 VAC input)
Rated input voltage 100 to 240 VAC
Allowable-input voltage variable range 85 to 264 VAC
80 to 370 VDC
Note at DC input The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).
Frequency 50/60 Hz (47 to 450 Hz Single-phase)
Rated input current 0.66 A TYP. (At 100 VAC input)
0.4 A TYP. (At 200 VAC input)
Harmonic Current EN61000-3-2
Leakage current 0.5 mA Max. (At 100 VAC input)
1.0 mA Max. (At 200 VAC input)
Inrush current 14 A TYP. (At 100 VAC input (For cold start at 25 CEL))
28 A TYP. (At 200 VAC input (For cold start at 25 CEL))
Output voltage 5 VDC
Output voltage variable range -10 to +15 % (With V. ADJ)

Ripple 2 %(p-p) Max. (Under the rated I/O conditions.)
60 mV Max. (Under the rated I/O conditions.)
Static input variation influence 0.5% Max. (At 85 to 264 VAC input, 100% load)
Static load variation influence 2% Max. (Output voltage: 5 V, at rated input, 0 to 100% load)
Ambient temperature variation influence 0.05 %/CEL Max.
Rated output current 4.0 A
Start up time 500 ms TYP. (100 VAC input)
360 ms TYP. (200 VAC input)
Hold time 31 ms TYP. (100 VAC input)
174 ms TYP. (200 VAC input)
Overload protection 105% to 160% of the rated output current
Inverted L voltage drop, Intermittent operation, Automatic reset
Overvoltage protection Operated at 130% Min. of the rated output voltage, Shut-off
Resetting: Reset the power by turning it back (OFF time: at least 3 min)
Overheat protection No
Maintenance forecast monitor output No
Total run time monitor output No
Undervoltage alarm output No
Power failure alarm output No
Parallel operation No (However, backup operation is possible; external diodes required.)
Series operation No
Remote sensing function No
Applicable standard (UL) Standard No.: UL508 (Listing, Class 2: Per UL1310), UL UR: UL60950-1 (Recognition)
Applicable standard (CSA) Standard No.: cUL: CSA C22.2 No.107.1 (Class 2: Per No.223), cUR: CSA C22.2 No.60950-1
Applicable standard (EN) EN50178, EN60950-1
Applicable standard (EC Directive (EMC Directive) ) Emission Enclosure: Conforms to EN61204-3 Class B
Emission AC mains: Conforms to EN61204-3 Class B and based on FCC Class A
Harmonic Current: EN61000-3-2
EMS: EN61204-3 Class B
Applicable standard (VDE) VDE0160, VDE0805 Teil 1
Applicable standard (SEMI) F47-0200 (200 VAC input)
Ambient temperature Operating: -10 to 60 ℃
Storage: -25 to 65 ℃
(with no icing or condensation)
Ambient humidity Operating: 25 to 85% RH
Storage: 25 to 90% RH
(with no icing or condensation)
Dielectric strength Between all inputs and all outputs: 3 kVAC for 1 min (Detection current: 20 mA)
Between all inputs and PE terminals: 2 kVAC for 1 min (Detection current: 20 mA)
Between all outputs and PE terminals: 1 kVAC for 1 min (Detection current: 20 mA)
Insulation resistance Between all outputs and all inputs/ PE terminals: 100 MOhm Min. (at 500 VDC)
Vibration resistance 10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance 150 m/s**2, in each 6 directions 3 times
Output indicator Yes (color: green)
Heat radiation Natural air-cooling
Construction Covered type
Terminal type Screw terminal
Mounting type DIN Rail mounting type
Weight (Main) Approx. 180 g
Gerelateerde Producten